PAC-24WM0808(S84746)
PAC-24WM0808(S84746)
Troubleshooting
1. Power does not turn on
• Check front panel leds and rear main fuse
• Ensure power cord is firmly in its socket and the switch
is in the on position
• Ensure you have 240VAC supply to the Power
Supply Unit
2. led’s are RED even
• To reset PTC , turn of power and wait for 30 sec,
then restart unit though there is no short circuit
3. Voltage drop is large
• Use thicker guage wire
4. Camera case is hot
• Check that the correct voltage is supplied to
the camera
5. Amp Meter display
• Power Supply load is approaching maximum current limit
Flashes continously
6. Amp Meter display
•
reads
OL
Power Supply unit has exceeded its maximum load
capacity.
D
isconnect 1 or more devices until Amp Meter
shows a reading less than the maximum capacity.
6
7
