PACOM 16-Channel, User Manual

Page: 33 / 84

Digital Video Recorder
25
Highlight
Use Mobile
and press the button to toggle between On and Off. When set to on, you can access a remote
DVR using a Blackberry or other mobile devices.
NOTE: Selecting Use Mobile sets the WebGuard service to be enabled automatically regardless of your WebGuard
settings.
You can access a remote DVR and monitor live video images using media players, such as VLC Player,
supporting RTSP service. Start the media player on your local PC and enter “rtsp://ID:Password@IP
address:RTSP port number/track ID=‘channel number’”, or start Internet Explorer on your Blackberry
or other mobile devices and enter “http://IP address:Webguard port number/”.
RTSP service might not be supported, depending on the type of media player.
Highlight the
WebGuard
tab, and the WebGuard screen displays.
Highlight
Use WebGuard Service
and press the button
to toggle between On and Off. See Appendix – WebGuard
for detailed descriptions of the WebGuard service.
Highlight the box beside
Port
and press the button. Set
the port number used when accessing WebGuard by using
the
Up
and
Down
arrow buttons to increase or decrease the
numbers.
Figure 25 — WebGuard setup screen.
Notification
The DVR can be set up to send an email or to contact a computer running RAS (Remote Administration System) when
an event occurs.
Highlight
Notification
in the Network menu and press the button. The
Notification
screen displays. You will be
able to change the Mail and Callback settings.
Figure 26 — Notification Mail setup screen.
Highlight
Enable
and press the button to toggle between
On and Off. You will only be able to change the settings if
Mail is enabled.
Highlight the box beside
SMTP Server
and press the
button. A virtual keyboard appears that you can use to enter
the IP address or domain name of the SMTP server.
NOTE: You will need to get the IP Address or domain
name of the SMTP Server from your network
administrator.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting
up the LAN.
Highlight the box beside
Port
and press the button. Use the arrow buttons to enter the SMTP Server port number
obtained from your system administrator. The default port number is 25.
Highlight
Use SSL/TLS
and press the button to toggle between On and Off. When it is On, the DVR can send an
email via an SMTP server requiring SSL (Secure Sockets Layer) authentication.