INSTALLATION GUIDE
FHZL Series LED Hazardous Location Lighting
Instructions and specifi cations are subject to change at any time without notice. Copyright© 2021 PacLights All Rights Reserved
Page 2 of 5
Need help? (800) 988 -6386 Email: [email protected] Website: www.PacLights.com
PL_INST_FHZL_v0
FHZL TRUNNION MOUNT (OPTIONAL)
The Optional FHZL Trunnion Mount is available for all FHZL fi xtures
(Fig. 4). The FHZL Trunnion Mount can be used to mount the FHZL
fi xture to a ceiling or a wall.
1
2
FIG. 4
FHZL FIXTURE
FHZL TRUNNION
MOUNT
Instead of having the fi xture directly mounted at a fi xed position
the FHZL fi xture can be adjusted by loosening the large Screws
and removing the smaller Screws at the sides of the of the Trunnion
Mount. This allows the fi xture to rotate to the desired tilt angle (30-
60-90 degrees) to aim at a specifi c position (Fig. 7).
4
FIG. 7
Fasten the Trunnion Mount to the mounting surface (Wall or Ceiling)
with the appropriate bolts (may vary depending on the mounting
surface) by a certifi ed personnel (Fig. 6). Refer to #2. for dimensions.
3
FIG. 5
FIG. 6
FHZL FIXTURE
WALL / CEILING
FHZL FIXTURE
FHZL Trunnion Mount dimensions (Fig. 5).
ANCHOR STUDS
TRUNNION MOUNT
TRUNNION
MOUNT
WALL / CEILING
SCREWS
NUTS & WASHERS
~
HOLES
Align the Trunnion Mount hole to the FHZL fi xture hole. Re-insert
and tighten the Screws (Fig. 8).
5
WALL / CEILING
FIG. 8
SCREWS
