Packshot
One
Mark II
HARDWARE INSTALLATION
SWING LIGHT INSTALLATION 2/3:
04
05
06
Remove the front swing lights from
inside.
Prepare the screws and washers as
pictured.
Use an Allen key to attach the
holding brackets on each front
corner as pictured.
Place the light panel that has a
sticker “L” on the holding bracket
on the left.
Place the light panel that has a
sticker “R” on the holding bracket
on the right.
Use the black hand screw and flat
washer to connect the light panel
to the holding bracket.
07
08
09