Packshot
One
Mark II
HARDWARE INSTALLATION:
CABLE CONNECTIONS 2/2:
04
05
Connect compatible camera to
your computer using the USB
cable supplied with the camera.
(Optional):
Instead of batteries,
we recommend using an AC power
adaptor to power your camera.
Note:
If you intend on using a
non-compatible camera, connect
the system to your camera using
the shutter release cable (not
included).
(OPTIONAL) ADDITIONAL BOTTOM GLASS INSTALLATION
STEP A
1/2:
01
02
03
Follow the
steps
c-e
in the Acrylic
Panel Installation section to remove
the middle glass.
Unscrew and remove the flap
plates on both sides of the bottom
front corner.
Remove the small white hand
screws on the holding bar.
(Follow step A if you buy Packshot
One
Mark II with 50 kg load capacity in advance)
Turn the system power switch to
the “ON” position.
Note:
Make sure to plug the swing
light cables into the main system
before turn the system power
switch to the “ON” position.
06