4. Carefully insert new bul into socket and push down bulb lock until it snaps into place ( Fig. 2 ).
HOW TO ASSEMBLE THE TREE
BEFORE YOUR START
Decide on appropriate lacation which at lease have 10FT hight spacing for your prodcut.
Remove all plastic bags and dispose of safety out of the reach of children & animals.
Tree is heavy. Recommend at least two people set up.
Each carton contains two tree sections , one adapter , two piece 23A batteries
and twenty four replace bulb.
1. Take out the tree from carton . ( see Fig 3 )
2. Put the tree bottom & stand on the groud.
3. Insert tree top into the bottom section ( see Step 1) .
4. Plug the light string cords from the bottom section to tree top ( see Step 2) .
Step 1
Step 2
Step3 adapter
Spare connector
5. Connect the power cord of the receiver to adapter ( see Step 3 ) .
Receiver
6. Shape the tree :
All hinged branches should fall into lowered position. (Fig 4 )
Any branches that remain upright should be gently lowered by hand Please refer
to Shaping Instructions for proper branch shaping technique.
Fig 4
Fig 3.
7. Plug the power adaptor to the mains .
Fig 4.
