background image

packardonline.com | 800.334.1769 13

Diagnostics

If the motor will not operate (turn on at any speed) see the information in the 

previous section related to Operational Characteristics and confirm the motor 

has the proper line voltage and 24vac inputs needed to operate. 
To reverse the rotation of the motor, see the information in the previous section 

related to Operational Characteristics (pg 11).  

Maintenance

The EC Max motor is permanently lubricated and requires no maintenance. 

Diagnostics, Maintenance & Warranty

1. All items sold by Packard, Inc. are warranted against defects in 

workmanship or materials under normal use for a period of one (1) year. 

Products are covered for up to a maximum of two (2) years from the 

manufacturer’s date code on the product or one year after installation, 

whichever comes first. 

2. No warranty is made as to the fitness of vendor’s products for a 

purpose. Buyer acknowledges that it alone has determined that the 

goods purchased will suitably meet the requirements of their intended 

use. In no event will Packard be liable for consequential, incidental or 

other damages. 

3. For products other than those listed below, please MAIL the original 

nameplate (label or sticker) for each item. Copies of labels will NOT be 

accepted. Please do NOT fax or email labels! 

4. A reason for failure MUST be provided for each item on the warranty 

claim. 

5. Credits are NOT to be taken by customer until merchandise or original 

nameplate has been received by Packard, Inc. and credit is issued. 

6. Credit will be issued upon verification of purchase history for ORIGINAL 

labels dated within manufacturing date code requirements.

7.Do not field scrap products until credit has been issued. 

8. In the event Packard or the manufacturer requires evaluation of warranty 

items, Packard will issue a return authorization form. Do not return 

warranty items unless requested.

9. Please contact Packard Warranty for these products prior to mailing 

claims.

 

Warranty

Summary of Contents for Ec Max

















Reviews: