Packard Bell oneTwo L5850, Service Manual

Page: 27 / 120

Packard Bell oneTwo M3850 / oneTwo M3851 / oneTwo L5850 / oneTwo L5851 Service Guide 19
Power Management Setup
Field Description Value
ACPI Suspend
Mode Use this item to define how your system suspends. Default value is S3
(STR), the suspend mode is suspend to RAM, i.e., the system shuts
down with the exception of a refresh current to the system memory. S3 (STR)
S1 (POS)
Deep Power Off
Mode Enables or disables compliance to the Energy-using Products Lot 6
Directives (EuP Lot 6). Enabled
Disabled
Power On by RTC
Alarm Enables or disables the system to wake up from a power-saving mode
when an RTC alarm occurs. Enabled
Disabled
Power On by PCIE
Devices Enables or disables the system to wake up from a power-saving mode
when an event occurs on an installed PCI Express device. Enabled
Disabled
Power On by PCI
Devices Enables or disables the system to wake up from a power-saving mode
when an event occurs on an installed PCI device. Enabled
Disabled
Power On by
Modem Ring Enables or disables the system to wake up from a power-saving mode
when a modem signal is received. network message Enabled
Disabled
Power On by
Onboard LAN Enables or disables the system to wake up from a power-saving mode
when the onboard LAN controller received a network message. Enabled
Disabled
Wake Up by PS/2
KB/Mouse Enables or disables the system to wake up from a power-saving mode
when a PS/2 keyboard or mouse is used. Enabled
Disabled
Wake Up by USB
KB/Mouse Enables or disables the system to wake up from a power-saving mode
when a USB keyboard or mouse is used. Enabled
Disabled
Restore On AC
Power Loss Select the power state when an AC power loss occurs.
•
Off - The computer remains off until the power button is pressed.
• Last State - The computer reverts to the last power state before the
power loss occurred.
• On - The computer switches back on after the AC power loss.
Power Off
Power On
Last State