Packard Bell ixtreme M5850, Service Manual

Page: 7 / 104

1
Introducing the Motherboard
Introduction
Thank you for choosing the H67 motherboard. This motherboard is a high performance, enhanced
function motherboard designed to support the LGA1155 socket for 2nd Generation IntelR CoreTM
Family/PentiumR/CeleronR processors for high-end business or personal desktop markets.
This motherboard is based on IntelR H67 Chipset for best desktop platform solution. H67 is a single-chip,
highly integrated, high performance Hyper-Threading peripheral controller, unmatched by any other single
chip-device controller. This motherboard supports up to 16 GB of system memory with dual channel DDR3
1333/ 1066 SDRAM. Two PCI are supported, fully compliant with PCI rev 2.2 specification at 33MHz. High
resolution graphics via PCI Express x16 slot, intended for Graphics Interface, is fully compliant to the PCI
Express Base Specification revision 2.0. In addition, one PCI Express slot is supported. It implements an
EHCI (Enhanced Host Controller Interface) compliant interface that provides fourteen USB 2.0 ports (six
USB 2.0 ports at the back panel and four USB 2.0 headers support additional eight USB 2.0 ports).
The motherboard is equipped with advanced full set of I/O ports in the rear panel, including PS/2 mouse
and PS/2 keyboard connectors, one DVI(co-lay HDMI) port, one D_sub (VGA) port, one Lan port, six USB
2.0/3.0 ports, and audio jacks for microphone, line-in and line-out. In addition, this motherboard supports
two SATA 6Gb/s connectors and four SATA 3Gb/s connectors.
Chapter1