10 -
Packard Bell DVD DivX 300/350 User's Guide
DVD player and VCR(DVD DivX 350)
DVD player and Y Cb/Pb Cr/Pr or SCART (DVD DivX 300)
Setting up your TV set
If the picture does not appear correctly on your TV set, you should check your TV's settings. Please refer to
your TV's documentation.
O
PERATION
INSTRUCTIONS
Before using your DVD player, please prepare the following:
1. Switch on your TV set and select AV mode.
2. If connected with an amplifier, switch on the amplifier and select DVD input.
3. Switch on the DVD player.
Step 1
Press the Open/Close button
on the remote control to open the tray.
Step 2
Insert the disc and press the Open/Close button
again, the player will automatically recognise the disc
type. Press the Play button
to play a disc.
Step 3
Press the Power button
on the remote control, the unit will switch into standby mode; press the button
again to resume.
Disc playback
After inserting a disc the unit will start playback.
If there is a DVD disc, the unit will show the menu or the titles.
If there is an audio CD, the unit will play the first tune.
Pause button
Use the Pause button to interrupt/resume display.
Prev button
To select the previous song or chapter.
Next button
To select the next song or chapter.
DVD DivX 350 6940100200.book Page 10 Wednesday, May 25, 2005 2:18 PM
