10
6.
Place appliance away from direct sunlight and sources of heat (stove, heater, radiator,
etc.) as it may cause the appliances to perform poorly. Direct sunlight may affect the
acrylic coating and the heat source from sunlight may increase electrical consumption of
the appliance.
It is recommended that you installed the wine cellar in a place where the ambient
temperature is between 25-27
℃
.
•
If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected. Placing this appliance in extreme cold or hot
conditions may cause the interior temperature to fluctuate. The range of 10-18
℃
(50-
66°F) may not be reached.
•
The temperature may fluctuate depending on whether or not the interior light is on or
off or whether the bottles are located on the upper, middle or lower section.
How to use the press-buttons on the Display Panel:
•
You can set the temperature according to your own preference. There are two buttons
on the panel, “ ” and “ ” which are for adjusting the temperature by 1
℃
increments,
between 10-18
℃
(50-66°F).
•
You can turn the interior light on or off by pressing the “Light” button.
Electrical requirements
1. The electrical work should be carried out by a suitably qualified and authorised
professional in strict accordance with the current local and national safety regulations.
2. Make sure the appliance is not connected to the power supply while during the
installation.
3. Do not connect the appliance to the extension lead of a power socket as this will not
guarantee safety of using this appliance.
4. Check the power supply of the house and make sure it is match with the appliance. The
connection data is listed on data plate on the wine cooler.
5. Install this appliance with a proper 3 pins plug that match local and national safety
standard and make sure the power is easily accessible after the appliance has been
completely built in.
6. Make sure the wine cooler is properly grounded and never remove the ‘ground’ from the
3-pins plug.
Installation steps
1. Please take note of the user who use this wine cooler most often and make sure there is
enough for ventilation around the wine cooler and the user is able to reach the power
socket & plug easily at the same time.
2. As this appliance is heavy, please make sure that the supporting of the floor or moving
