2. CLEANING THE VACUUM FILTER
a. Lift the cover
b. Take off the vacuum cover by rotating it counter-clockwise
c. Remove the filter and its housing
d. Use clear water to clean the walls and the bottom of the filter
e. Remove the filter and its housing
f. Wash all components thoroughly
g. Reassemble repeating the above operations in reverse
3. CLEANING THE SQUEEGEE
To obtain the best drying results, keep the squeegee clean. To clean the squeegee it is
necessary to:
a. Remove the vacuum hose from the squeegee
b. Lift locking latches. Remove the squeegee assembly by pulling rearward
c. Clean the inside of the squeegee thoroughly
d. Clean the squeegee blades thoroughly
e. Reassemble
4. REPLACING THE SQUEEGEE BLADES
Check the squeegee blades for wear and if necessary, change them. To replace the squeegee
blades:
a. Remove the squeegee vacuum hose from its port
b. Lift locking latches and pull squeegee assembly rearward
c. Release the band clamps by lifting the band clamp latch
d. Remove squeegee blades
e. Rotate or replace the blades. Please note that the squeegee has 4 useable edges so you
may be able to rotate squeegee blades
f. To reassemble the squeegee, repeat the above operations in reverse
DAILY MACHINE MAINTENANCE
11