4. Switch off the water solenoid valve switch
5. Switch off the brush motor switch
6. Switch off the vacuum motor switch
7. Transport the machine to the location where the recovery tank should be emptied
8.
Remove the drain hose at the front of the recovery tank
9. Remove the drain plug and empty the recovery tank
WARNING!
Use gloves for protection from contact with dangerous solutions
11. Remove the brush or pad driver and clean them with clear water
UPON COMPLETION OF MACHINE USE
DAILY MACHINE MAINTENANCE
CLEANING THE RECOVERY TANK
1. Empty the recovery tank by removing the drain plug from the drain hose
WARNING:
Use gloves for protection from contact with dangerous solution
2. Lift the cover of the recovery tank
3. Take off the vacuum cover by rotating it counter clockwise
4. Remove the filter and its housing
5. Rinse the tank with clean water
Summary of Contents for Z210
Page 34: ...34 WIRING DIAGRAM DRAWING 10...
