Page 5 of 35
MACHINE PREPARATION
BATTERY INSTALLATION
(Cont.)
d) Place the batteries in the
battery compartment.
e) Connect the battery
connector to the machine
connector
f) Replace the recovery tank
and reassemble the vacuum
cover and squeegee hose.
3) BATTERY CHARGE LEVEL
INDICATOR
The batteries’ indicator is digital
with 4 display levels and a flashing
one. The numbers, which appear
on the display, show the
approximate charge level. 4
represents a full charge and 0
represents discharged and the
batteries must be recharged.
NOTE:
The brush motor
automatically switches off after
the battery indicator light
begins to flash. You will be
able run the vacuum motor and
finish drying any wet areas.
Battery Charge
Indicator
Machine Connector
Battery Connector
Summary of Contents for Z20BA
