Solana Leg Press Option Assembly Instructions
page 10
1
2
3
4
5
6
Step 4. Assemble the Pulleys
4. Assemble the Pulleys
A. Ensure that the Weight Pin has been pulled out of
the Weight Stack.
B. Attach the top and bottom portions of the Pulley
Plate to the Side Upright using
two 3-inch bolts
four washers
two locknuts
Wrench tighten.
C. Mount one 3½-inch pulley to the top hole on the
Pulley Plate using
one 2½-inch bolt
two washers
one 3/8-inch barrel spacer
one 3½-inch cable retainer
one locknut
Finger tighten.
D. Mount one 4½-inch pulley to the bottom hole on the
Pulley Plate using
one 2¾-inch bolt
two washers
one stop bracket
one 3/8-inch barrel spacer
one 4½-inch cable retainer
one locknut
Finger tighten.
E. Have an assistant hold the Support Arm in an
upright position. Mount one 4½-inch pulley to the
Support Arm using
one 4¼-inch bolt
five washers
one 4½-inch cable retainer
one 3/8-inch barrel spacer
one locknut
Finger tighten.
The illustration shows the proper orientation and
fastener alignment.
Top Cap
Weight
A
Weight Stack
Weight Pin
2 - 3" bolts
4 - washers
2 - locknuts
Pulley
Plate
B
Pulley plate
3½" Pulley
Cable
retainer
Barrel spacer
1 - 3½" pulley
1 - 2½" bolt
2 - washers
1 - barrel
spacer
1 - 3½" cable
retainer
1 - locknut
1 - 4½" pulley
1 - 2¾" bolt
2 - washers
1 - 4½" cable retainer
1 - support arm bracket
1 - barrel spacer
1 - locknut
Pulley plate
4½" Pulley
Cable
retainer
Stop
bracket
C
C
D
E
1 - 4½" pulley
1 - 4¼" bolt
5 - washers
1 - 3/8" barrel spacer
1 - 4½" cable
retainer
1 - locknut
Support arm
Leg Press
