Pacific S-20, Parts & Operating Manual, Page: 11 / 57

Depress position “A” for 1 second
then depress position “B”
11
Connect the cleaning pad to the S-20 disk pad driver by centering it on the driver.
Disconnect center lock fitting & lay
next to the pad driver
Center pad on pad driver
MACHINE PREPARATION
ATTACHING A CLEANING PAD TO YOUR PAD DRIVER - DISK HEAD
Screw on center lock fitting
1 2 3
If using a floor pad with your S-20 pad driver:
1
2
3
Place your pad driver on a work surface and remove the center lock fitting from the pad driver .
Remove the pad driver by locating the automatic off switch on the lower control panel at the rear of the machine. Depress position “A”
for 1 second and then depress position “B” to “click-off” the pad driver.
4
4
Screw on the center lock fitting, making sure that the center lock has compressed the pad and is snug.
NOTE:
The S-20 pad driver is a tufted pad driver. Do not use a pad driver on the floor without a pad in place. This will cause damage to your
floor.