background image

WARRANTY POLICY

POLYETHYLENE WET/DRY VACUUMS

The 

Pacific 

Wet/Dry Vacuum  has been manufactured, tested and inspected in accordance with specific engineering require-

ments and is WARRANTED to be free from defects in workmanship and materials as follows:

Five (5) Years Parts, One (1) Year Labor - Polyethylene Components
One (1) Year Parts and Labor - All other components unless excluded below.

This warranty extends to the original user/purchaser and only when used, operated and maintained in accordance with

Pacific 

Operating and Maintenance instructions.

This warranty does not apply to certain wear parts and accessories of the machine such as electrical cords, carbon motor
brushes, floor brushes, squeegee blades, hoses, tools, filters, casters, wheels, etc.  Nor does it apply to damage or failure
caused by improper use, abuse or neglect.  Warranty credit or replacement of return parts including motors, etc., is subject to
incoming inspection of those items.

To secure repair under this warranty, the following procedure should be taken:

The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery
charges prepaid.  If unable to locate the Dealer, you may contact 

Pacific 

at the address listed herein for the location of

the nearest 

Pacific 

repair center or agent or for other instructions pertaining to your warranty difficulty.

Upon compliance with the above warranty procedure, all warranted repairs would be completed at no additional charge
or cost to the user.

Only 

Pacific 

or its authorized dealers and agents may make no charge warranty repairs on this product.  All others do so

at their own risk.

This warranty limits 

Pacific’s 

liability to the repair of the product and/or warranted parts replacement and does not include

incidental or consequential damages arising from the use of a 

Pacific 

machine whether defective or not.

This warranty is in lieu of all other expressed or implied warranties and is extended to the original purchaser/user.

605601

10/01

2259 Sheridan

Muskegon, Michigan  49442

Ph: (800) 968-1332  Fax: (231) 773-1642

www.nextwaveofclean.com

Summary of Contents for PV-12













Reviews: