background image

READ THIS BOOK

This operator’s book has important information for the use
and safe operation of this machine.  Read this book care-
fully before starting the machine.  Keep this book and tell
all  operators  to  read  the  book.    If  you  do  not  follow  the
instructions, you can cause an injury or damage equipment,
furniture or buildings.

For new books write to:
               

  Pacific

               2259 S. Sheridan
               Muskegon, MI  49442-6252

Carefully inspect all components to ensure that there is no
concealed freight damage.  If such damage is discovered,
file a “CONCEALED DAMAGE REPORT” immediately
with the delivering carrier.

The contents of this manual are based on the latest product
information available at the time of publication.  Pacific  re-
serves  the  right  to  make  changes  or  improvements  to  its
machines without notice.

FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING INFORMATION:

MODEL

  _______________________________

SERIAL NUMBER

 _______________________

PART NUMBER

 _________________________

DATE PURCHASED _____________

________

_

                    OPERATING & MAINTENANCE

INTRODUCTION                                            INSTRUCTIONS

WET/DRY VACUUMS

PV-12
PV-18
PV-18S
PV-18D

Gulper 12P
Gulper 18P
Gulper 18PS
Gulper 18PD

Summary of Contents for PV-12













Reviews: