background image

WARRANTY POLICY 

LIMITED WARRANTY 

 

The 

Pacific

 16 Gallon Wet/Dry Vacuum with Front-Mounted Squeegee has been manufactured, tested and 

inspected in accordance with specific engineering requirements.  This machine is WARRANTED to be free 
from defects in workmanship and materials for periods as follows from the date of purchase. 
 
Five (5) Years Parts, One (1) Year Labor – Polyethylene Components 
One (1) Year Parts & Labor – All other components unless excluded below 
 
This warranty extends to the original user/purchaser and only when used, operated and maintained in 
accordance with 

Pacific

 Operating and Maintenance instructions. 

 
This warranty does not apply to certain wear parts and accessories of the machine such as electrical cords, 
carbon motor brushes, floor brushes, belts, hoses, tools, squeegee blades, etc., nor does it apply to damage 
or failure caused by improper use, abuse or neglect.  Warranty credit of return parts including motors, etc., is 
subject to incoming inspection of those items. 
 
To secure repair under this warranty, the following procedure should be taken: 
 
1)  The inoperative machine or warranted parts must be delivered to the authorized service center  with 

shipping and delivery charges prepaid.  If unable to locate a service center, you may contact 

Pacific

 at the 

address listed herein for the location of the nearest repair center or agent or for other instructions 
pertaining to your warranty difficulty. 

2)  Upon compliance with the above warranty procedure, all warranted repairs will be completed at no 

additional charge or cost to the user. 

3) Only 

Pacific

 or its authorized dealers and agents may make no charge warranty repairs on this product.  

All others do so at their own risk. 

 
This warranty limits 

Pacific

 liability to the repair of the product and/or warranted parts replacement and does 

not include incidental or consequential damages arising from the use of a 

Pacific

 machine whether defective 

or not. 
 
This warranty is in lieu of all other expressed or implied warranties and is extended to the original 
purchaser/user. 

2259 South Sheridan Road

Muskegon, MI  49442

Phone:  231-773-1330     Fax: 231-773-1642

www.pacificfloorcare.com     [email protected]

03/11

Summary of Contents for GULPER 16SV











Reviews: