Placement of the Reactor
Place the reactor as close to your sump and CO2 tank as possible. The longer the tube length the longer it will
take for adjustments to take effect. This makes adjusting a calcium reactor more difficult.
Technical data:
CalcFeeder AC1 PRO - main media chamber - ø150mm, total height 56cm. Media capacity: 7.0 liters.
For aquariums up to 800 liters.
CalcFeeder AC2 PRO - main media chamber - ø200mm, total height 56cm. Media capacity: 12.5 liters.
For aquariums up to 1200 liters.
CalcFeeder AC3 PRO - main media chamber - ø250mm, total height 56cm. Media capacity: 19.0 liters.
For aquariums up to 2000 liters.
CalcFeeder AC4 PRO - main media chamber - ø300mm, total height 56cm. Media capacity: 28.0 liters.
For aquariums up to 4000 liters.
Original package with CalcFeeder PRO include:
1) Calcium reactor with recirculation pump and optical sensor assembled in reactor body
2) step motor dosing pump with internal computer for solenoid valve and optical sensor control
3) solenoid valve 12V with 6.3mm plug
4) power supply for CalcFeeder PRO controller
5) connection tubings
6) 2pcs tubing holders for input/output tubings (input/output water)
7) key for optical sensor unmount
Things you will need to install, operate and tune in your reactor
Medium/Large grain reactor media (we recommend CaribSea ARM Coarse)
CO2 system complete with tank, regulator, needle valve
calcium and alkalinity test kits
Additional degassing chamber(DC-1 dedicated for AC1/AC2 reactors, DC-2 for AC3/AC4 versions) is not inc-
lude in regular package.
CalcFeeder Calcium reactor user’s manual
Page 12
