SKU 94201
For technical questions, please call 1-800-444-3353.
Page 6
Assembly
nOtE:
Look at page 11 and 12 to help locate and identify the parts mentioned below.
1. Insert the Upper Frame Assembly (3) onto the Bottom Frame (27) and secure with
Screws (35), Gaskets (36), and Washers (37) as shown below in
Figure 1.
2. Thread on the Water Hose (not provided) to the Brass Quick Connector (11). Tighten
securely. Next pull back on the sleeve of the quick connector and firmly press it onto
the male side of the quick connector that is attached to the pump. See
Fig. 2
below.
3. Thread on the High Pressure Hose (1) to the Spray Gun (40) then tighten securely.
4. Attach the other end of the High Pressure Hose (1) to the Pump Assembly (33) by
threading it onto the High Pressure Hose Connection. See
Fig. 3
below.
Figure 1
High Pressure Hose
connection
Water inlet connection
Brass Quick connector
(Connects to the water inlet hose)
Figure 2
Figure 3
Suction Hose
Assembly (9)
