Pacific hydrostar 68333 Manual Download Page 6

Page 6

For technical questions, please call 1-800-444-3353.

SKU 68333

  Read the EntiRE imPORtant 

SaFEty inFORmatiOn section at the 

beginning of this manual including 

all text under subheadings therein 

before set up or use of this product.

tO PREvEnt SERiOuS injuRy FROm 

aCCiDEntal OPERatiOn: 

turn the Power Switch of the tool off, unplug 

the tool from its electrical outlet, shut off the 

water supply and safely discharge all residual 

water pressure from the unit before assembling 

or making any adjustments to the tool.

Check the Inlet Strainer for any blockage, including 

packaging debris.  The Pressure Washer may 

be shipped with a plastic plug in the Inlet.

note:

  For additional information regarding the parts 

listed in the following pages, refer to 

Parts List and 

Assembly Diagram

 on page 14. Some of the following 

assembly steps may have been performed at the factory.

Components

instructions for Putting into use

note:

 Check for and remove any shipping plugs from the Water Supply Inlet and Pressure Hose Outlet on the 

front of the machine.

Handle

Power

Switch

Soap Dispenser

High Pressure 

Hose

Pressure Hose Outlet

Spray Gun

Extension  

Nozzle

Body

Water Supply 

Inlet

(on back)

Summary of Contents for 68333

















Reviews: