background image

Page 2

For technical questions, please call 1-800-444-3353.

SKU 68333

Specifications

Electrical Input 120 V~ / 60 Hz / 12 A (Rated)
Maximum 

Pressure

1,500 PSI

Maximum 

Flow Rate

1.3 GPM 

High Pressure 

Hose

13 ft.

Power Cord

35 ft.

Save this manual

Keep this manual for the safety warnings and 

precautions, assembly, operating, inspection, 

maintenance and cleaning procedures.  Write the 

product’s serial number in the back of the manual near 

the assembly diagram (or month and year of purchase 

if product has no number).  Keep this manual and the 

receipt in a safe and dry place for future reference.

important Safety instructions

In this manual, on the labeling, and all other 

information provided with this product:

  this is the safety alert symbol.  it is 

used to alert you to potential personal 

injury hazards.  Obey all safety 

messages that follow this symbol to 

avoid possible injury or death.

DanGER indicates a hazardous situation which, if 

not avoided, will result in death or serious injury.

WaRninG indicates a hazardous situation which, if 

not avoided, could result in death or serious injury.

CautiOn, used with the safety alert symbol, 

indicates a hazardous situation which, if not 

avoided, could result in minor or moderate injury.

nOtiCE is used to address practices 

not related to personal injury.

CautiOn, without the safety alert symbol, is used 

to address practices not related to personal injury.

Safety Warnings

  WaRninG When using this product 

basic precautions should always be 

followed, including the following:

1.  Read all the instructions before using the product.

2.  To reduce the risk of injury, close supervision is 

necessary when a product is used near children.

3.  Know how to stop the product and bleed pressures 

quickly. Be thoroughly familiar with the controls.

4.  Stay alert – watch what you are doing.

5.  Do not operate the product when fatigued or under 

the influence of medication, alcohol or drugs.

6.  Keep operating area clear of all persons.

7.  Do not overreach or stand on unstable support. 

Keep good footing and balance at all times.

8.  Follow the maintenance instructions 

specified in the manual.

9.  This product Is provided with A Ground Fault 

Circuit Interrupter (GFCI) built into the power 

cord plug. If replacement of the plug or cord is 

needed, use only identical replacement parts.

10. WARNING – Risk of injection or injury– do 

not direct discharge stream at persons.

11.  Connect to individual branch circuit only.

12. WARNING – To reduce the risk of electrocution, 

keep all connections dry and off the ground. 

Do not touch plug with wet hands.

13. Do not abuse the cord.  Never use the cord for 

carrying, pulling or unplugging the pressure 

washer.  Keep cord away from heat, oil, sharp 

edges or moving parts.  Damaged or entangled 

cords increase the risk of electric shock.

14. 

GFCi PRECautiOnS 

Test GFCI (Ground Fault Circuit Interrupter) 

before each use as follows:

a.  Plug GFCI into power outlet and press 

reset button.  Indicator should turn on.

b.  Press test button.  Indicator should turn off.

c.  Press reset button again for use.  

Do not use if above test fails. 

The GFCI device does not protect against electrical 

shock due to contact with both circuit conductors or a 

fault in any wiring supplying the GFCI device. 

to allow GFCi unit to function properly, 

ExtEnSiOn CORDS muSt nOt bE 

uSED with this pressure washer.

Summary of Contents for 68333

















Reviews: