Pacific Hoists U-MEGA PEH050, Operations Manual & Parts List

Page: 17 / 52

16
is wear or stretch.
(4)It will be a cutting-out possibility if you use a chain fall either wear or stretch during
operation.
(5) Do not replace a chain fall by yourself and do please contact specific either service centers
or contractors to help you out.
(6) The chain fall must be replaced whole instead of in part.
(7) The load sheave, regulator, and regulator plate wheel must be replaced the same time as
you do a chain replacement.
Note : Chain must be in perfect condition without any defects.
Illustration (1) Chain pitch measure Illustration (2) Diameter measure
(b) Check hook with care. If hook shows cracks, deformation or excessive wear, it should be replaced.
Top Hook Bottom Hook
Model
Capacity
(kg)
Hook
Dimensions (mm) Allow Stress
H1 B1 B2 H2 B3 B4 C D g E ( kg/mm
2
)
PEH050 500
T 33 22 10 29 22 10 40 95.5 25.5 55 70
B
28 18 8 23 18 8 35 - 26 50 70
PEH100 1000
T 38 28 12 33 28 12 46 120 31 65 100
B 33 23 9 29 23 9 40 - 28 61 70
PEH200-2 2000
T 38 28 12 33 28 12 46 120 31 65 100
B
45 31 10 41 31 10 46 - 36 75 70
OK NO
OK
OK NO