Soft Components: Neck Protector, Comfort Padding
and Chinstrap
-
Clean the neck protector, comfort padding and chinstrap
separately
-
Machine washing and drying of the soft components should not
exceed a temperature of 40°C (104°F).
-
Wear protective gloves and eye/face splash protection when
cleaning soiled items.
-
Do not wash neck protector and comfort padding alongside
personal items.
-
Do not dry clean your helmet components.
CLEANING AND DISINFECTION
Clean and disinfect your protective helmet after each use or whenever
your helmet has become soiled. You may clean your helmet with or without
the neck protector, comfort padding, and chinstrap. However it is advisable
to remove them before cleaning the protective helmet.
Use the following procedures for routine cleaning by hand in a utility sink:
1).
Choose a utility sink that is specifically used for cleaning protective
gear; do not use a kitchen sink or other sink that is employed for personal
products.
2).
Optionally remove the neck protector and chinstraps and wash
them separately using the instructions for machine washing.
3).
Brush off any loose debris.
4).
Fill the utility sink with warm water no hotter than 40°C.
5).
Use a mild detergent in an amount according to the detergent supplier’s
instructions.
6).
Scrub the helmet exterior gently using a soft-bristle brush.
Continued next page.
28
F20 USER INFORMATION GUIDE
