Pacific Floorcare S-24, Manual

Page: 8 / 92

RETURN TO
TABLE OF
CONTENTS
- 3 -
UNPACKING THE MACHINE
1. Remove outer cardboard packaging.
2. Remove the shrink wrap securing the ramp and allow the ramp (not shown) to lower to the ground.
3. Using a #2 Philips driver, remove the screws from the front and rear wood wheel chocks.
4. Using a 3/8” socket and driver or wrench, remove the screws from the tie-down straps located at each corner
of the machine.
5. Raise the scrub head to the transport position.
6. Carefully maneuver the machine down the ramp.
7. Install the rear squeegee assembly.