12
SINC 250314-24
6) Route cable from speed control to fan and reattach wire
support tabs on the underside of the ash lip. Note wire
positions. (Fig.18 & Fig.19)
7) Remove Thermal switch from right hand fan mounting
bracket and relocate to left hand fan mounting bracket.
Fig #20&21
8) Reconnect the wires to the fans (Fig.22) and thermal snap
switch (Fig.23), refi t ash lip, sides and top. Ensure that
the power cable is correctly routed through the surround
and it is not touching the fi rebox side. Wire placement is
important to prevent damage to wires.
WIRE SUPPORT TABS
Fig. # 18
Fig. # 19
Fig. # 21
Fig. # 20
Fig. # 22
Fig. # 23
Summary of Contents for SUMMIT INSERT
Page 21: ...SINC 250314 24 21 Fig 25...
Page 22: ...22 SINC 250314 24 NOTES...
