Figure 66:
Log set and pilot shield.
Figure 67:
Rear log installation.
Figure 68:
Front log installation.
Figure 69:
Decorative log installation.
Figure 70:
Ember placement.
Figure 71:
Completed log set.
CASC.BODYB
CMDN.BODYB
Installer Information
Traditional Log Set Installation / Removal
Installation
1. Position rear log against the back firebox
(Figure 67).
2. Position front log just behind the front burner
tube (Figure 68).
3. Position log 3 (decorative log) with the thin end of
the log resting on top of the right end of the front
log(Figure 69).
4. Place ember chunks in front of the front log to
hide the burner(Figure 70).
Note: Do Not Block Burner Ports with Embers.
Removal
1. Remove embers from fireplace.
2. Lift the decorative log off of the front log and
remove it from the firebox.
3. Lift the front log off of the burner and remove it
from the firebox.
4. Lift the back log over the pilot and burner and
remove it from the firebox.
34
251115-44
5055.634-B
