CASC.BODYB
CMDN.BODYB
Installer Information
Plumbing and Electrical
Gas connection
To make the required electrical and gas connections, start by positioning the gas fireplace.
Connect the gas supply line to the 1/2” fitting that extends out of the unit (Figure 31).
Please see the gas supply section for requirements of the gas supply.
A gas shut off valve is located inside the fireplace and may be accessed by removing the
inner firebox unit.
Electrical connection
Open the access panel seen in (Figure 31) and connect the line wires to the supplied wires
inside the junction box using marrettes. A licensed electrician must be used to make this
connection.
Figure 31:
Casco camden gas connection & electrical access panel.
22
251115-44
5055.634-B
