Pacific energy BROADWAY, Installation And Operating Instructions Manual

Page: 29 / 36

29
INSTALLER
INFORMATION
Glass Burner Installation / Removal
Air Deflector Installation / Removal
Installation
Position the air deflector in the fireplace as seen in
figure 44 and secure with two screws using a
screwdriver.
Removal
Remove the two screws seen in figure 44 using a
screwdriver, and remove the air deflector from
fireplace.
Burner Tray Installation / Removal
Installation
Place the burner tray in the fireplace and secure with
4 screws using a screwdriver, as seen in figure 45.
Removal
Remove the 4 screws seen in figure 45 using a
screwdriver, and remove the burner tray.
Glass Installation
To install the glass, evenly spread a thin layer of
crushed glass across the entire burner pan as seen
in figure 46. Ensure glass does not cover pilot.
Rock Installation (Optional)
To install the optional rock set, place rocks making
sure no rocks are in the flame when the unit is
operating. Do not cover air openings.
Figure 44: Air Deflector
Figure 45:Glass Burner Tray
Figure 46: Glass Installation
Figure 48: Rocks Installation Figure 47: Glass Burner Kit