Figure 66: Log set.
Figure 67: Rear log installation.
Figure 68: Front log installation.
Figure 69: Decorative log installation.
Figure 70: Ember placement.
Figure 71: Complete log set.
BRSL.BODYB
BDFD.BODYB
Log Set Installation / Removal
Installation
1. Position rear log against the back fi rebox as seen in
Figure 67.
2. Position front log just behind the front burner tube as
seen in Figure 68.
3. Position log 3 with the thin end of the log resting on
top of the right end of the front log as seen in Figure
69.
4. Place ember pieces in front of the front log to hide the
burner as seen in Figure 70.
Removal
1. Remove embers from fi replace.
2. Lift the decorative log off of the front log and remove it
from the fi rebox.
3. Lift the front log off of the burner and remove it from
the fi rebox.
4. Lift the back log over the pilot and burner and remove
from fi rebox.
Note:
Do Not Block Burner Ports with Embers
35
5055.633-B
050216-44
