manualshive.com logo in svg

Pacific energy BEDFORD A Series, Installation And Operating Instructions Manual

The Pacific energy BEDFORD A Series is a highly efficient heating solution that provides exceptional warmth and comfort in your home. To ensure a seamless installation and optimal performance, you can easily access and download the comprehensive Installation And Operating Instructions Manual for free from our website.

Share
Download
background image

BRSL.BODYB

BDFD.BODYB

5055.633-B

 Table Of Contents 

 Important Note for the Commonwealth of Massachusetts:  ...... 3
 Caution ....................................................................................... 4
 Safety ......................................................................................... 5
 First Fire  ..................................................................................... 6
 Warnings and Cautions  ............................................................. 6
 Remote Control Operation  .........................................................7

System Description   ...........................................................7

Transmitter (Remote Control with LCD Display)   ................7

IFC Module......................................................................... 8
Operating Procedure .......................................................... 8
Initializing the system for the first time .............................. 8

Temperature indication Display .......................................... 9
Turn on the Fireplace  ......................................................... 9
Turn off the Fireplace  ......................................................... 9

Manual Bypass of the Remote System .............................. 9
Key Lock ............................................................................ 9
Instructions for enabling the  

    Thermostat function for Canadian users. .......................... 9

Remote Flame Control  .................................................... 10
Room Thermostat (Transmitter Operation) ...................... 10
Smart Thermostat (Transmitter Operation) .......................11
Comfort Fan Speed Control ..............................................11
Low Battery Power Detection .......................................... 12

Transmitter ........................................................................ 12

Receiver ........................................................................... 12
Continuous Pilot/Intermittent Pilot (CPI/IPI) selection  .... 12

 Maintenance  ............................................................................ 13

Glass Door: ...................................................................... 13

Annual Inspection: ............................................................ 13

Periodically: ...................................................................... 13

 Lighting Instructions  ................................................................ 14
 Fireplace Dimensions  .............................................................. 15

Bristol: .............................................................................. 15
Bedford: ........................................................................... 15

 Existing Fireplace Preparation  ................................................. 16
 Clearances to Combustibles  ....................................................17

Mantel height and depth table  .........................................17

 Venting  ..................................................................................... 18

 Plumbing and Electrical  ........................................................... 19
 Gas Supply  .............................................................................. 20
 Gas Pressure Check / Output / Efficiency  ............................... 20

Gas pressure requirements .............................................. 20
Bristol ............................................................................... 20
Bedford ............................................................................ 20

 Gas Pressure Testing Procedure  ..............................................21
 Pilot Adjustment ........................................................................21
 Propane Conversion  ................................................................ 22
 Adjustable Leveling Bolts  ........................................................ 23
 Door Installation/Removal  ....................................................... 23

Adjustable leveling bolts .................................................. 23

Installation ........................................................................ 23
Removal ........................................................................... 23

 Surround Installation Instructions  ............................................ 24
 Surround Front Dimensions  .................................................... 25

Bristol Fronts  ................................................................... 25
Bedford Fronts  ................................................................ 25

 Surround Dimensions  .............................................................. 26

Bristol Surrounds ............................................................. 26
Bedford Surrounds    ........................................................ 26

 Battery Holder ...........................................................................27
 Fan Removal / Installation  ....................................................... 28
 Panel Installation / Removal  .................................................... 32

Installation

 ...........................................................

32

Removal ........................................................................... 32

 Air Deflector Installation / Removal  ......................................... 33
 Burner Tray Installation / Removal  .......................................... 34
 Burner Installation / Removal  .................................................. 34
 Log Set Installation / Removal  ................................................ 35
 Rustic Log Set Installation / Removal  ..................................... 36
 Glass Burner Installation / Removal  .........................................37
 Damper/Air Shutter .................................................................. 38
 Replacement Parts  .................................................................. 39
 Wiring Diagram  ........................................................................ 40
 Bristol Rating Label  ..................................................................41
 Bedford Rating Label  .............................................................. 42

2

050216-44

Summary of Contents for BEDFORD A Series













































Reviews:

No comments

Related manuals for BEDFORD A Series

TermaTech BIO 70 User, Maintenance And Installation Manual preview
BIO 70
Brand: TermaTech Pages: 52
Dimplex EF3003-230 Practical User'S Manual preview
EF3003-230
Brand: Dimplex Pages: 16
Valor LT1 2500K Quick Start Manual preview
LT1 2500K
Brand: Valor Pages: 3
GDC AIRFLAME Installer And Owner Manual preview
AIRFLAME
Brand: GDC Pages: 5
Valor H5-WPK Installation Manual preview
H5-WPK
Brand: Valor Pages: 2
Masport HESTIA 2 Manual preview
HESTIA 2
Brand: Masport Pages: 10
Stellar Hearth LG-INS Installation And Operating Manual preview
LG-INS
Brand: Stellar Hearth Pages: 51
Bold Flame NOVURHED User Manual preview
NOVURHED
Brand: Bold Flame Pages: 22
RealFlame Silverton G8600 Assembly Instructions Manual preview
Silverton G8600
Brand: RealFlame Pages: 8
Teamson Home Peaktop Manual preview
Peaktop
Brand: Teamson Home Pages: 16
Piazzetta 600 HT Installation, Use And Maintenance Instructions preview
600 HT
Brand: Piazzetta Pages: 40
Dimplex DFP6776C Install Manual preview
DFP6776C
Brand: Dimplex Pages: 7
Vermont Castings LHEACNSS Contour KT1B80 Installation Instructions preview
LHEACNSS Contour KT1B80
Brand: Vermont Castings Pages: 2
Heatilator G136 Owner'S Manual And Installation Instructions preview
G136
Brand: Heatilator Pages: 36
Bio-Blaze DIAMOND I Safety And Assembly Instructions Manual preview
DIAMOND I
Brand: Bio-Blaze Pages: 16
Bond 68487A Owner'S Manual preview
68487A
Brand: Bond Pages: 42
Majestic DNE Operating Instructions Manual preview
DNE
Brand: Majestic Pages: 48
Valcourt FP-7-LM ANTOINETTE Quick Install/Reference Manual preview
FP-7-LM ANTOINETTE
Brand: Valcourt Pages: 2

Brands by name

Popular brands

Load more brands