BLUETOOTH
®
THERMAL PRINTER
A Bluetooth
®
thermal printer (Item code: DDS-TP) can be used with this instrument.
If a printout of results is required, press the ON/OFF button on printer, and the
indicating LED should turn on. To turn off the printer, press and hold the ON/OFF
button on printer until the indicating LED flashes and then turns off.
INSERT PAPER
Pull the handle. When inserting a new roll of paper, make sure the glossy side of the
paper is kept close to dentation.
NOTE:
If nothing can be printed, change the side of the paper and try again.
BATTERY
A lithium battery with capacity of 1800 mAh is supplied, along with a battery charger.
The charger can be powered by the car battery using the 12V adapter provided.
STANDARD THERMAL PAPER SIZE
6cm x 630cm
PAIRING THE BLUETOOTH
®
If you have purchased the
AlcoVUE
®
instrument and Bluetooth
®
thermal printer
together as a kit, the two devices will already be paired for immediate use.
If you are purchasing a printer as a standalone item, you will need to manually pair
the device to your existing
AlcoVUE
®
instrument.
To do this, power on the Bluetooth
®
thermal printer, then turn on your
AlcoVUE
®
instrument, and select the ‘Settings’ icon from the menu. Press the ‘Bluetooth’ icon
and
click ‘Match’. Return to the main menu where the Bluetooth
®
icon should now be
visible in the top right-hand corner.
AlcoVUE® USER HANDBOOK
Revision 1.4
February 2018
13
