13
Attach the Front Fender
Parts: Front fender, front fork
Hardware: long screw, washer, nut
Tools: 10 mm open-ended wrench, phillips-head screwdriver
1. Remove the fork protector (not shown) .
2. Align the holes on the fender tab with the
holes at the base of the fork .
3. Insert the washer through the long screw, and
then insert the long screw through the fender
tabs and holes on the fork .
4. Using the 10 mm open-ended wrench, fasten
the nut to the end of the long screw .
Before proceeding to the next steps, carefully turn the
bicycle upside down so the bicycle is resting on the
handlebars and saddles .
Tip!
2
3
4
