PACIFIC CYCLE KT1550I, Owner'S Manual

Page: 8 / 12

8
❶ Insert the steering column.
• Working from under the body, insert the short
end of the steering column through the steering
column bracket. Insert the long end up through
the opening in the dashboard.
❷ Attach the steering wheel.
• Remove the nut and bolt from the steering wheel
• Connect the wire connectors coming from the
steering column to the wire connector coming
from the steering wheel
• Insert the steering wheel over the steering
column
• Insert the nut into the hex shape opening on
the steering wheel
• Insert the bolt through the steering wheel
and steering column and fasten into the nut
❸ Attach the mirrors.
• Insert the end of the mirror into the mirror inset
on the door
• Working from the inside of the door, insert a
screw through the door into the mirror and
tighten the screw
❹ Make the one time battery connection BEFORE
attaching the seat. See page 10.
❺ Attach the seat.
• Insert the hook on the back of the seat into the
opening on the back wall of the body
• Rotate the seat down and lock the seat into place
Follow the assembly steps in the order listed below.
Assembly:
Attach the steering wheel, Steering column, mirrors and seat
❶
❷