Assembly
1
Attaching the back panel
2
Placing cushions
□
□
□
Place the chair base (A) on a flat, smooth surface.
4
□
Level the chair with foot glides at the bottom of chair legs if necessary.
Place cushions (C) and (D) on the chair.
□
□
Hold the back panel (B) close to the rear support bars (1) of
the recliner mechanism.
Adjust the gap between the two support bars (1) to match
the gap between two slots (2) on the back panel. (Step 1.1)
Slide the two support bars (1) into the two slots (2)
until two audible clicks are heard. (Step 1.2)
1
2
A
B
Step 1.1
Step 1.2
C
D
