AeGIS 7000P
Page 21
Chapter 4
SYSTEM’S OPERATION
A. How to view tenant’s directory
1. Press
(scroll A-Z) or
2. Press
(scroll Z-A)
B. How to initiate a call from the system
Two ways to initiate a call
1. By scrolling (see A, press 3 or 6 to scroll) then
press # to call
2. By directory, press # (wait for dial tone) then
press the tenant’s directory number.
C. How to release the door remotely
1. Establish
a
communication
2. Tenant must press 9 to release the door.
D. How to make a call to an extension or voice
1. Established
a
communication
2. Press the voice mail or extension number
using the system’s keypad.
E. How to extend talk time
Talk time is set using function code 70 (10-180
seconds), see p18.
1. Establish
a
communication
2. Warning beep will be heard 10 minutes before
the talk time expired.
3. Press # to extend the talk time
F. How to call into the system
You must know the system’s phone number
1. Call the system’s phone number
2. The system will answer between 2
nd
- 4
th
rings,
then
BEEP BEEP!
will be heard
3. Press
to establish communication
4. Press 9 to release the door.
NOTE:
VISITOR
MUST
KNOW
THE
TENANT’S
DIRECTORY
NUMBER
ALTHOUGH,
THE
SYSTEM
IS
TESTED
WITH
MOST
PHONES,
COMPATIBILITY
ISSUE
MAY
STILL
BE
OCCURRED,
ESPECIALLY
WITH
VOICE
OVER
IP
(VOIP)
PHONE.
PULSE
PHONE
WILL
NOT
WORK
