6. SYSTEM REQUIREMENTS
To install SPL software in a personal computer/Laptop, it must run Windows XP or
Windows 98 operating system. The basic characteristics of the required hardware are
the following:
•
486 processor or more (Pentium recommended)
•
RAM of 16 Mbytes
•
8.0 Mbytes of free space in the hard disk
•
Programming Interface supplied by Pacetronix connected to the equipment.
Even if it is not strictly necessary to use a mouse to run the program, for all functions
can be commanded from the keyboard, it is highly recommended to have one in order
to handle it more comfortably.
6.1
Installation
To install SPL software verify that the computer fulfills the basic requirements
indicated above and insert the CD labeled SPL software into your CD-ROM drive.
Double click the ” setup “ file in the folder. Once the Auto Run Installation program
begins just follow the instructions.
The notebooks supplied by Pacetronix have SPL software preinstalled; in this case the
installation is not necessary.
7. INSTRUCTION FOR USE
1.
Please ensure before use that SMART-E Programmer Model SEP-11 should contain
I.
Programming Interface
II.
SMART-E Programming Head Model SEH-11
III.
USB cable
IV.
ECG cable (If required)
2.
Connect USB cable’s USB end to USB port of the PC/Laptop.
3.
Connect USB cable’s interface end to USB I/O of programming interface.
4.
Connect SMART-E Programming Head Model SEH-11 to programming interface
SMART-E Programming Head Model SEH-11 female connector.
5.
Please ensure that a green LED glowing on the SMART-E Programming Head Model
SEH-11 .
