PaceSaver
®
Getting to know your new LiNX remote module / Joystick
9
2.2.5 LOW VOLTAGE WARNING
A low voltage warning is indicated with the left-most LED flashing.
This occurs when the battery voltage level has decreased below its low
voltage warning set-point.
Batteries should be charged immediately.
2.2.6 CUT-OFF VOLTAGE
When the battery voltage decreases below the battery cut-off voltage:
• the first red LED will flash on the battery gauge
• the status indicator (under the power button) will display a flash
code 2 or 7
• the horn will sound once every 10 seconds
Batteries should be charged immediately.
2.3.0 THE XLR CHARGER CONNECTOR
The XLR charger connector connects to either a battery charger or the LiNX Access Key. The
position of the connector depends on the remote module: for the low profile remote
modules, it is located on the side, and for the traditional style remote modules, it is located to-
wards the front, at the base.
The battery charging socket of the LiNX system is a 5-pin XLR type, located on the LiNX
remote module.
WARNING:
When charging your wheelchair, ensure the XLR connector is seated all the way in
the joystick. Failing to make a full connection can damage the charger/joystick.
