PaceSaver
®
Getting to know your new LiNX remote module / Joystick
7
2.1.9 CHANGING SEATING FUNCTION
The wheelchair’s seating function can be selected with the seating function
select button, which is the rocker button located on the right-hand side of
the remote module.
Press the top of the button to select the next seating function. Press the
bottom of the button to select the previous seating function. Note: only
seating functions that have been programmed will be available for selection.
The selected seating function is displayed on the drive/actuator status
indicator as shown below.
2.2.0 Reading the indicators
2.2.1 The status indicator
The status indicator is located underneath the power button. When
the system is not powered up, the status indicator will not light up.
When the system is powered up, and there are no faults with the
system, the status indicator will be lit green.
If, when powered up, there is a fault with the system, then the
status indicator will flash red. The number of flashes will indicate
the type of error.
Unique option
