INTRODUCTION
Pacer models PT200S (ºF) and PT300 (ºC) digital thermometers
are accurate, versatile instruments for measuring temperature.
They are available with a round immersion tip (standard) or a
sharp insertion tip (no-charge option).
The PT200S has a high and low range and the PT300 has a display
hold switch setting.
SECTION 1 - SPECIFICATIONS
Sensor:
Semiconductor (PTC)
Range:
Temperature – PT200S:
Low
range:
-55.0º
to
199.9ºF
High
range:
-55º
to
300ºF
Temperature – PT300:
-55.0º to 150.0ºC
Accuracy:
PT200S:
±1ºF
±1
digit
PT300:
±0.5ºC
±1
digit
Resolution:
PT200S:
Low
range:
0.1
º
F
High
range:
1ºF
PT300:
0.1ºC
Response
time:
Approximately15
seconds
Sampling
rate:
2.5 measurements/second
Operating temperature:
32º to 120
º
F (0º to 49ºC)
Storage temperature:
:
14º to 140ºF (-10º to 60ºC)
Power supply:
9V alkaline battery (Eveready 522
or equivalent)
Battery
Life:
Approximately 200 hours
Battery check:
Automatic “LO BAT” display
Dimensions:
Instrument:
4.75” x 2.75” x 1”
Weight:
6 ounces with battery
Display:
0.5” LCD, 3 ½ digits
-1-
SPECIFICATIONS - continued
Options:
CG-3 charger:
PN 6043 (with NiMH battery)
Insertion (sharp) tip:
No charge, specify at purchase
Rigid carrying case:
PN 6005
Leatherette
holster:
PN
3865
Included:
1 piece:
PT200S or PT300 thermometer
1 piece:
9V alkaline battery
1 piece:
PN M2962 operation manual
SECTION 2 – OPERATION
PT200S
The switch to the left is OFF; center position is ON
in the LOW RANGE and to the right is ON in the
HIGH RANGE. Hold the probe tip at the location to
be measured. The K-type thermocouple is located at
the tip. If the temperature being measured is over
range (see SPECIFICATIONS), a “1” will be
displayed with the other digits blinking.
PT300
The switch to the left is OFF, center position is ON
and to the right is the display “HOLD” position.
Hold the probe tip at the location to be measured.
The K-type thermocouple is located at the tip. If the
temperature being measured is over range (see
SPECIFICATIONS), a “1” will be displayed with
the other digits blinking.
NOTE: On both units “LO BATT” indicates a low
battery. Change (or charge) the battery.
-2-
