The PACER INDUSTRIAL MIXERS Dual arm and Single arm mixers are shipped fully assembled. The ma-
chine must be mounted to the PACER INDUSTRIAL MIXERS Floor Stand or Counter Stand. Failure to do so
will void the warranty. Refer to the instructions below.
Installing the mixer on the Counter Stand.
1. Assemble the Counter Stand castings to the mixer using the hardware provided.
2. Insert a rubber foot into the top and bottom of each spring.
3. Insert a spring and foot assembly into the recess in the bottom of each corner of the Counter Stand castings.
4. Plug the power cord into a grounded receptacle (see page 7).
Note: Explosion proof models are not furnished with a power cord. The machine must be hard wired to
the power source by a qualified electrician.
Item Qty.
Part Number / Description
1
2
PIM-00060 Counter stand casting
2
8
PIM-10063 Rubber bumper
3
4
PIM-10064 Spring
4
4
PIM-10114 Carriage bolt, 3/8-16 x 1.50
5
4
PIM-10119 Flat washer, 3/8
6
4
PIM-10172 Lock washer, split 3/8
7
4
PIM-10127 Nut, hex 3/8-16
5
