™
By Miltronics Mfg. Svcs., Inc.
Phone: (603) 352-0187
95 Krif Road EFax: (603) 352-7649
Keene, NH 03431 USA [email protected]
DA400 User Manual, PN 10075 Miltronics Mfg. Svcs., Inc.
Rev 3.5, 01-Aug-2019
www.pacer-instruments-usa.com
Page 21 of 28
APPENDIX G – VIEWING AND CAPTURING DATA
(IF EQUIPPED WITH EITHER USB OR RS232 OUTPUTS)
NOTE: HyperTerminal is no longer included with Windows Vista or later packages.
Previous manuals referenced this program. We now reference, Parallax Serial Terminal.
There are many terminal emulator programs available on the market. It is up to the
end-user to determine which program is compatible with his/her system, what settings
it may require and the Pacer Instruments/Miltronics product being used. Miltronics
Mfg. Svcs., Inc. does not endorse or recommend any of these programs and assumes
no liability for their use.
There are many ways to capture the serial port data from the Pacer Instrument.
The simplest method is to use a terminal emulator program.
Using a terminal emulator allows the serial COM port to be opened, with the
below port settings, and real-time data to be viewed from the instrument. One
such terminal emulator program is Parallax Serial Terminal, available from
Open the Parallax Serial Terminal, based on how you installed the program onto
your computer. The below screen will come up.
Attach your instrument & probe to your computer via the USB cable.
