17
TDC777D INSTALLER’S MANUAL (502-3432110)
CONNECTING THE EQUIPMENT (cont.)
Setup H - DVD and Component-video HDTV
(+ optional home theater)
RF Cable TV
Y, Pb, Pr Video, Audio L & R
TDC777D
set-top
Home
Theater
HDTV
Cable TV
RF
DVD
Player
O
pt
io
na
l D
ig
ita
l A
ud
io
Audio L & R or Optional Digital Audio
Composite Video
Cable Wiring Diagram H
500mA MAX.
CABLE INPUT
LEFT
AUDIO IN
VCR IN
RIGHT
AUDIO IN
VIDEO IN
HOME THEATER
RECEIVER
OPTICAL
AUDIO IN
COAXIAL
AUDIO IN
DIGITAL AUDIO IN
POWER
8
3
12
ANTENNA/
RF IN
LEFT
AUDIO IN
RIGHT
AUDIO IN
VIDEO IN
POWER
HDTV
PB/CB IN
PR/CR IN
Y IN
COMPONENT
VIDEO IN
S-VIDEO
IN
LEFT
AUDIO IN
RIGHT
AUDIO IN
VIDEO OUT
DVD
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUT
OPTICAL COAXIAL
POWER
11
10
LEFT
AUDIO OUT
RIGHT
AUDIO OUT
RF CABLE
13
About Setup H: Using component-video cables to connect a DVD player and an HDTV
In this setup, a DVD player is added to Setup G.
• Connect the DVD player directly to the HDTV using any spare composite video or S-video input connectors that the HDTV may have.
• The audio connection from the DVD player could go directly to the HDTV, provided that there are enough appropriate audio input connectors on the
HDTV. If there are not enough audio inputs on the HDTV, or if you wish to enhance the sound, you must connect a home theater receiver or audio
amplifier to the DVD, as shown (cables 10).
• If the DVD player has a digital audio output, this can be used to connect to home theater (e.g. cable 11 in the diagram above), in which case, cables
10 are not needed.
• A home theater receiver will also enhance the sound from the set-top. There is a choice of two S/PDIF outputs on the set-top: (i) electrical (labeled
DIGITAL AUDIO OUT, which is shown connected by cable 8 in the diagram above), and (ii) optical (labeled DIGITAL AUDIO OUT (OPTICAL)).
• In the diagram above, cables 3 are not needed if cable 8 is used.