31
Operation
Password
5. If a Password has been previously stored in
system memory, enter the 4 key sequence
Password.
6. At this point the Digital Readout will ask you:
Set-Up Mode
a) If you would like to retain the "Same"
Password (if previously stored) in the
system. If you wish to retain the
"Same" Password, press the Key
directly beneath the word “Same” (Set
Key).
b) If you do not wish to have a Password
stored in the system. If this is the
case, press the key directly beneath the
word “No” (Offset Key) on the Digital
Readout. Any previously stored
Password will be removed from the
system.
c) If you wish to enter a new Password,
press the key directly beneath the word
“YES” (Scroll Up (
▲
) Key) on the
Digital Readout. The Digital Readout
will display “Enter New Password”.
Enter a new 4 key sequence Password.
As each key is pressed, an asterisk (*)
will be displayed.
NOTE
The following steps of this procedure move you forward through the Set-Up
Mode options. You may also step backward (to this point only) by pressing
the Offset Key.
Summary of Contents for ST 40A
Page 1: ...Operation Maintenance Manual ST 40A Systems ...
Page 17: ...15 ...
