production environment for monitoring of set temperatures, since under most production
circumstances the temperature will not deviate.
TEMPERATURE SETBACK
- System feature which, when enabled, will independently set back the
Set Tip Temperature to 177°C (350°F) after a user selected period of handpiece inactivity (10 to 90
minutes, settable in 10 minute increments). This feature is enabled (or disabled) in the Set-Up Mode.
TIP OFFSET CONSTANT
- Specific value for a given handpiece/tip combination upon which the
system automatically calculates the correct Tip Temperature Offset at any entered Set Tip
Temperature. This value is the temperature loss (Tip Temperature Offset) at 371°C (700°F) and is set
in the Set-Up Mode. A value of 0-115°C (0-240°F) may be entered in the Set-Up Mode.
TIP TEMPERATURE OFFSET
- Difference in value between the temperature measured by the
temperature sensor (at the heater) and the true temperature of the tip at a given Set Tip Temperature.
Packing List
Item #
Description
Part Number
ST 145
Only
ST 145 E
Only
1
System Power Supply
1
0
2
System Power Supply (Export)
0
1
5
Power Cord, 115V
1332-0094
1
0
6
Power Cord, 230V
1332-0093
0
1
7 Tip
Tool
1100-0206
0
0
8
Hex Key, .050
1100-0237
1
1
9
Hot Grip Removal Pad
1100-0307
0
0
10
Operations Manual CD
CD5050-0459
1
1
Spare Parts
Item #
Description
PACE Part Number
Fuse, 1.25 Amp, 250 V, Time Lag (ST 145)
1159-0251-P5
1
Fuse, 0.63 Amp, 250 V, Time Lag (ST 145E)
1159-0252-P5
2 TEKLINK
Cable
1332-0252-P1
3
TEKLINK Remote Box
3008-0218-P1
4
Tip & Temperature Selection Chart
5050-0251
Service
Please contact PACE or your local distributor for service and repair.
©2004 PACE Inc., Annapolis Junction, Maryland
Page 20 of 22
All Rights Reserved
