©2013 PACE Worldwide, Southern Pines, North Carolina All Rights Reserved
Page 4 of 18
EOS/ESD
Tip-To-Ground Resistance:
Less than 5 ohms.
AC Leakage:
Less than 2 millivolts RMS from 50Hz to 10MHz
ENVIRONMENTAL REQUIREMENTS
Ambient Operating Temperature:
0°C to 50°C (32°F to 120°F)
Storage Temperature:
-40°C to 100°C (-40°F to 212°F)
Capabilities
All capabilities are dependent upon the use of the appropriate Functional Accessories or Work Aids (refer
to Basic Operation section). Available SensaTemp and TempWise handpieces and their associated
assembly and repair functions are listed below. An Operations and Maintenance Manual is provided
separately with each handpiece which describes the applications and recommended procedures for that
particular tool.
The MBT 301 allows either SENSATEMP or TEMPWISE technology handpieces to be plugged into any
of 3, continuously active, handpiece channels. The new dual-purpose vacuum/pressure pump and
delivery system with PACE’s patented SNAP-VAC Technology, provides the most vacuum available for
desoldering applications. When used with an air pencil, the high resolution, pressure control valve allows
for precise adjustment when working on the smallest components.
MBT 301 Compatible Handpieces (Blue Connector)
TD-100 handpiece -
The most responsive soldering iron available. Uses tip-heater cartridges. TD-100 Kit
P/N 6993-0263-P1 Handpiece only P/N 6010-0147-P1
TD-100N handpiece –
A nitrogen compatible version of the TD-100. Requires 6993-0271. TD-100N Kit
P/N 6993-0272-P1 Handpiece only P/N 6010-0156-P1
MT-100 handpiece –
Tip heater cartridge tweezers for SMD removal. MT-100 Kit P/N 6993-0264-P1
Handpiece only P/N 6010-0148-P1
PS-90 Soldering Iron-
Provides a wide range of SMD and thru-hole installation and removal capability as
well as unsurpassed thermal performance on heavy, multilayer thru-hole assemblies at safe, lower
working temperatures. A wide variety of 3/16" shank, quick change thru-hole and SMD tips (for chip
components, SOTs, SOICs and other components) are available. PS-90 Kit P/N 6993-0267-P1 Handpiece
only P/N 6010-0150-P1
PS-90N Soldering Iron-
A nitrogen compatible version of the PS-90. Requires Nitrogen regulator kit P/N
6993-0271. PS-90N Kit P/N 6993-0274-P1 Handpiece only P/N 6010-0157-P1
SX-100 Sodr-X-Tractor handpiece
- Air handpiece ideal for thru-hole desoldering on extra high
mass multilayer boards. SX-100 Kit P/N 6993-0266-P1 Handpiece only P/N 6010-0149-P1
TT-65 ThermoTweez handpiece
- Performs removal of PLCC (J Leaded), LCCC (leadless) and other
surface mount devices. TT-65 Kit P/N 6993-0268-P1 Handpiece only P/N 6010-0151-P1
TJ-80 Mini Thermo Jet handpiece
– Foot pedal activated precision air pencil for the installation or
removal of SMDs. TJ-80 Kit P/N 6993-0270-P1 Handpiece only P/N 6010-0153-P1
MBT 301 Handpieces tips
A complete list of available handpiece tips is available from your local PACE distributor or online at
www.paceworldwide.com
.
