Pace DC700X, Operator'S Manual

Page: 38 / 44

36
Check Suggested solution Further checks, if there is still a problem
Is the picture distorted
or too small?
NO
D
YES
R
Check that the TV Aspect Ratio and TV
Display Capability, as set on your set-top,
are appropriate for your TV (see pages 21
through 25). Change them if necessary. If your TV is a 16:9 TV, you can use Auto Pillarbox to add
black borders to 4:3 transmissions, so that the picture is
not stretched (see page 24).
If the TV Aspect Ratio and TV Display Capability settings
are correct, try using Zoom to improve the picture (see
page 32) or consult the instructions that came with your
TV and try adjusting your TV’s display.
Can you display menus
and guides on the
screen?
YES
D
NO
R
If your TV is connected to the VIDEO OUT
or S-VIDEO jacks, then you will see menus
and guides only if the screen resolution
480i
is set to “ Yes ” and 480p , 720p and 1080i
are set to “
No
”.
Change the TV Display Capability resolution settings if
necessary (see page 23).
Is there any sound?
YES
D
NO
R
Check that the audio cables are securely and
correctly connected. Check that you have not muted the sound on your set-
top and/or TV. Adjust the volume control on your set-top
and/or TV. If you are using a home theater receiver, check
it is set up correctly.
Can you hear stereo
sound?
YES
D
Please see the next page
NO
R
First check that the program is likely to have
stereo sound (an old movie, for example, may
not be in stereo).
Check the on-screen Setup Menu, Audio
settings (see page 33). The Stereo Output
may be set to “Mono”. Change it to “Stereo”.
If your TV is mono, you will hear stereo sound only if
you have a stereo audio amplifier and speakers or home
theater connected to your stereo VCR or set-top.
SOLVING PROBLEMS (cont.)