5
Thank you for choosing Charter Communications
Option 3: Code Search Method
a. Manually turn the TV on.
b. Press and hold
SETUP
SETUP
on the remote control until the LED blinks twice.
c. Press and hold down
OK/ENTER
OK
ENTER
.
d. Release the button when the TV turns off. Setup is complete.
e. Test the remote to ensure the buttons now control the TV and DTA.
8. Place the DTA
a. After programming the remote, place the DTA in a suitable location, observing the ventilation requirements
described in the safety information manual.
b. For your convenience, you can use adhesive fasteners (Velcro) to attach your DTA to the side or back of your TV.
conGrATUlATIons!
You’ve completed the DTA installation process. You are now ready to program the following
settings via the Menu on the remote control.
A default setting for each is in place now, unless otherwise requested by the
property. In the event a setting is changed, an instruction on how to adjust each setting is also included.
chAnnel TUnInG lIsT
Users can access channels using the
Channel Up
and
Down
CH
buttons on the remote control, or by entering a channel
number on the remote.
Note: A message similar to the following will appear if a user attempts to tune a channel to which your property does not subscribe. This
should only occur if your property subscribes to Limited Basic Service only, does not subscribe to HBO or does not use insertion channels.
TV Power
Menu
Menu Up
Menu Down
Menu Left
Menu Right
OK/Enter
Info
Guide
Exit
TV Mute
Setup
Page Down
TV Volume Up
TV Volume Down
Page Up
Cable Power
(currently
deactivated)
Last Channel
Channel Up
Channel Down
Digits 0-9
Language
(currently
deactivated)
(currently
deactivated)
