©2018 PACE Inc., Vass, North Carolina. All Rights Reserved
BE SURE the new filter cartridge is installed with the airflow arrows correctly oriented as shown on the filter.
When disposing of used filters, care must be taken to comply with all applicable environmental regulations.
Carefully consult the SDS supplied with the material(s) producing the fume. If in doubt, check with your local
Environmental Authority.
Replacement Filter Chart
Product Image
Name/Part Number
Description & Recommended Application
Pre-Filter
P/N 8883-0112-P5
Comes standard with the Arm-Evac 150. The Pre-Filter is a lower
efficiency (90% arrestance, EU 4) particle filter that is used to
protect the primary filter from large particles, extending the life of
the primary filter. Available in packages of 5 each.
General Purpose
Combo Filter
P/N 8883-0932-P1
Comes standard with Arm-Evac 150. Also includes Pre-Filter P/N
8883-0112. Recommended for benchtop soldering and electronic
rework applications, where normal volumes of fumes are being
generated for 1 or 2 shifts (.2-80 microns, 85% EU 8).
Cleanroom Combo
Filter
P/N 8883-0922-P1
Includes HEPA particulate filter media & activated carbon element.
Also includes Pre-Filter P/N 8883-0112. Recommended for
applications in cleanroom environments or where high filtration
efficiency is required (.2-2 microns, 99.99% EU 13).
Adhesive Combo
Filter
P/N 8883-0952-P1
Also includes Pre-Filter P/N 8883-0112. Recommended for any
bench top application utilizing adhesives, solvents and cleaners
used in small quantities.
Summary of Contents for ARM-EVAC 150
Page 2: ......
